beautypg.com

Connecting your ta128 to the power supply, Connecting the ta128 to your computer – ZyXEL Communications Omni TA128 User Manual

Page 18

background image

6

Connecting Your TA128 to the Power
Supply

To Connect your TA128 to the power supply, follow the steps
given below:

1. Turn off your computer.

2. Make sure the power switch on the TA128 is in the OFF

(down) position.

3. Connect the round end of the power adapter to the POWER

JACK on the TA’s back panel.

4. Plug the power supply unit to an AC wall jack then power on

the TA128.

5. Observe the LED light status on the front panel of your TA128

and make sure PWR LED is on.

O

O

NOTE

: Use only the power adapter supplied with your TA. Never use a

power adapter designed for a different product.

Connecting the TA128 to Your Computer

Your TA128 comes with a 25 pin, male to female cable, which is to
be used to connect the main serial port of TA128 to your computer
serial port as seen in the figure below: