ZyXEL Communications Omni TA128 - Manual (Page 154)

142
Command bit dec hex Function and description Ref.
2 0 0 ISDN without V.42bis. &K00
4 4 ISDN with V.42bis if
applicable. &K44
4-5 0 * 0 ATDs, ATDPs, and ATDTs is
mapped to ATDMs. &O0
32 20 ATDs, ATDPs, and ATDTs is
mapped to ATDIs. &O2
48 30 ATDs, ATDPs, and ATDTs is
mapped to ATDBs. &O3
6 0 0* DOVBS answer using 56kbps
(US only).
64 40 DOVBS answer using 64kbps.
7 0 0* ISDN data call using normal
Bearer Service.
128 80 ISDN data call using Voice
Bearer Service.
S84= bit dec hex
0-2
Embedded Protocol Analyzer
control. CCn
0 1 1 Capture DTE-DCE interface
protocol information.
1 2 2 Capture B-channel (X.75 or
V.120) frames.
2 4 4 Capture D-channel protocol
information.
3 0 *0 Display S register value in
decimal format.
8 8 Display S register value in hex
format.
4 0 * 0 Indicate Caller ID after the 1st
RING message.
16 10 Disable Caller ID indication.