ZyXEL Communications Omni TA128 - Manual (Page 133)

121
Command Options Function & Description Ref.
Sr=n Set S-register 'r' to value 'n'. 'n'
must be a decimal number
between 0 and 255.
Sr? Display value stored in S-register
'r'.
SPIDr=nnn
… User enters Service Profile ID
nnn… (SPID), for USA switches.
SPID0 First SPID number.
SPID1 Second SPID Number, if any.
SPID? Display the SPID setting(s).
UPX Download firmware to the Flash
EPROM using Xmodem protocol.
Vn Sets display type for Result
Codes. S23.6
V0 Display result code in numeric
form. (See also S35.7 and the
result code table of 'ATXn').
V1 * Display result code in verbose
form.
Xn n=0-7
5 * Result code options, see the
Options Table. S23.3-5
Zn n=0-4 Reset TA and set power-on
profile. S15.5-7
Zn Reset TA and load user profile n
(0-3).
Z4 Reset TA and load factory
settings.
$ Basic command summary help.
Description of ATI3 Output:
The Link Status Report output appears as follows:
ZyXEL ISDN TA LINK STATUS REPORT