ZyXEL Communications Omni TA128 - Manual (Page 129)

117
Command Options Function & Description Ref.
CT Clear buffer and start the
embedded protocol analyzer.
Capture data immediately and start
timer.
C$ Invoke the interpretation function
of the embedded protocol analyzer
and display the results on DTE.
Ds Dial s (numbers and options) that
follow (see also S38.0, S35.4). The
options of s are listed as follows:
, Pause for a time specified in S6.
Remaining digits will be dialed as
in-band DTMF.
Y0 Unknown type of number
Y1 International number
Y2 National number
Y3 Network specific number
Y4 Subscriber number
Y6 Abbreviated number
Z0 Type of sub-address, NSAP with
AFI=$50, IA5 characters
Z2 Type of sub-address, user
specified, IA5 characters
N0 Unknown numbering plan
N1 ISDN/Telephony numbering plan
(CCITT E.164/E.163)
N3 Data numbering plan (CCITT
X.121)
N8 National standard numbering plan
N9 Private numbering plan
/ Called party sub-address
delimiters