ZyXEL Communications Omni TA128 - Manual (Page 149)

137
Command bit dec hex Function and description Ref.
32 20 Software (XON/XOFF) flow
control. &H4
40 28 Reserved. &H5
S29= 0-39 0-39 Set default dial phone number
pointer, use AT&Zn=s to store
phone numbers.
+000 *D
S31= 0-
255 0-
FF Holds the ASCII decimal value
of the XON. +017
S32= 0-
255 0-
FF Holds the ASCII decimal value
of the XOFF. +019
S35= bit dec hex Bit mapped register.
1
2 2 Disable aborting from terminal
during modem handshaking.
4 16 10 When Data/Voice with is
pressed, TA will dial the
default number. *Dn
S29
7 128 60 Enable extended numerical
result codes from 50-71 when
an error corrected connection
is made. Use with ATV0 (see
result code table). V0
S23.6
S36= bit dec hex Bit mapped register. +000
5-7 *0 0 Disable security function. *G0
32 20 Enable type 1 security, with
password check (ZyXEL to
ZyXEL only). *G1
64 40 Enable type 1 security, with
password check and call-back
(ZyXEL to ZyXEL only). *G2
96 60 Enable type 2 security, with
password check. *G3
128 80 Enable type 2 security, with
password check and call-back. *G4