ZyXEL Communications Omni TA128 - Manual (Page 130)

118
Command Options Function & Description Ref.
Format
of “s” [[Yn][Nn]called_party_number][[
W][,]]inband_dtmf_number
or
[[Yn][Nn]called_party_Number][/
[Zn]called_party_subaddress/]
DAs Dial s (number and options) that
follows for the Analog adapter,
Phone 1.
DBs Dial s (number and options) that
follows for the Analog adapter,
Phone 2.
DBn Connection option if leased-line
mode is selected after power-on. S85.0
DB1 Use B1 channel in originate mode.
DB2 Use B2 channel in originate mode.
DB3 Use B1 & B2 channels in originate
mode.
DIs Dial s (number and options) that
follows for ISDN data call
DL Repeat last ATD command
DNn n=0-1 Set directory numbers (USA).
DN0=xx
xxxx Set the DNO value.
DN1= Clear the DNO.
DN? Query present DNs.
DSn n=0-39 Dial number stored in non-volatile
RAM at location 'n'; use “+” to
dial two consecutive numbers for
bundling or MPPP calls S44.3
En Command mode local echo of
keyboard commands S23.0
E0 Echo off
E1 * Echo on