ZyXEL Communications Omni TA128 - Manual (Page 132)

120
Command Options Function & Description Ref.
KSxn n=0-63
*0 Sub-persist time interval for BOD;
BOD disabled if n=0
x= M(in Minute unit) or S(in
Second unit) S125b1-7
Ln n=0-3
2 * Speaker volume control. The
higher the value, the higher the
volume S24.4-5
Mn M=0-2 Speaker control S21.1-2
M0 Speaker always OFF
M1 * Speaker ON until call is answered
M2 Speaker always ON
Nn n=0-3
3 * Ring volume control.'N0' will
disable the audio ring function S24.0-1
O Return to on-line state
Pn n=0-6 D channel protocol selection
(USA) for American Version S86
P0 * Northern Telecom proprietary
ISDN
P1 National ISDN 1 (1 SPID)
P2 National ISDN 1 (2 SPID)
P3 Reserved
P4 AT&T custom point-to-point
P5 AT&T custom point-to-multipoint
(1 SPID)
P6 AT&T custom point-to-multipoint
(2 SPID)
Qn n=0-1 Result code displayed S23.7
Q0 * TA returns result code
Q1 TA does not return result code
Sr.b=n Set bit 'b' of S-register 'r' to value
'n'. 'n' is a binary digit '0' or '1'
Sr.b? Display value of bit 'b' of S-register
'r'