Yamaha RX-Z11 - Manual (Page 72)

Using HD Radio™ features (U.S.A. model only)
72
En
HD Radio is a new technology that enables FM and AM radio stations to broadcast programs digitally. Digital broadcasting provides
listeners with radically improved audio quality and reception as well as new data services. Furthermore, supplemental program services
allow listeners to select from up to 8 HD Radio programs multicast on a single FM HD Radio channel. For further information on HD Radio,
visit “http://www.ibiguity.com/”.
This unit is equipped with an HD Radio reception feature, facilitating CD quality FM broadcasts as well as analog FM stereo quality AM
broadcasts. In addition, this unit can receive both audio and data (such as song titles, artist names, program types, and comments) from
supplemental program services (HD1 to HD8).
This unit is capable of receiving both hybrid and all-digital HD Radio
station signals. However, this unit may not automatically receive all-digital
FM station signals and the automatic tuning operation may stop. In this case,
select one of the preset stations, or manually tune into the all-digital FM
station you want to select, and then set the tuning mode back to the
automatic tuning mode by pressing
ITUNING MODE.
You can select the preset HD Radio stations by the names of the
stations.
Before using this feature, preset the HD Radio stations to this unit in
advance.
1
Set the operation mode selector to F
AMP and then
press I
MENU to display the GUI menu.
The top GUI menu appears in the video monitor.
2
Press 9k to select “Input Select” and then press
9
h.
3
Press 9k / n repeatedly to select “TUNER” and then
press 9h.
4
Press 9n repeatedly to select “HD Radio”
5
Press 9k / n to select “Station Search” and then
press 9h.
6
Press 9
ENTER to enter the search menu.
7
Press 9l / h repeatedly to place the _ (underscore)
under the space or character you want to edit and
then 9k / n repeatedly to select the character you
want to use.
y
• Press 9ENTER to switch between character types.
• Press 9h repeatedly to select “EXIT” to cancel the search.
8
Press 9h repeatedly to select “Search” and then
press 9
ENTER to start searching.
Once this unit finishes the search, the result appears in the
video monitor as follows.
9
Press 9k / n repeatedly to select the desired station
in the result of the search.
The selected station is highlighted in the result.
10
Press I
MENU to exit from the GUI menu.
Using HD Radio™ features (U.S.A. model only)
Note
Multi-zone configurations and the HD Radio tuning
functions
This unit has both an HD Radio receiver unit and a conventional FM/AM
radio receiver unit. You can set the tuner mode for each zone (main zone,
Zone 2, Zone 3, or Zone 4) by setting “TUNER” in “Input Select” (see
page 96) or “Manual Setup” (see page 102). Default setting for each
zone is as follows:
Main zone: HD Radio (HD Radio tuning mode)
Other zones: TUNER (Conventional FM/AM tuning mode)
Searching HD Radio stations by using
the GUI menu
Note
Station Search
Volume Trim
Rename
CAPITAL
SEARCH EXIT
Station Search
Volume Trim
Rename
Result
A1 WXYZ-FM
A5 WUSC-AM