Yamaha RX-Z11 - Manual (Page 42)

Connections
42
En
■ Connecting the AC power cable
Plug the supplied AC power cable into the AC inlet after all other
connections are complete, and then plug the AC power cable into an
AC wall outlet.
■ AC OUTLET(S) (SWITCHED)
Australia model ..................................................... 1 outlet
U.S.A. and Canada models....................................2 outlets
Use these outlet(s) to supply power to any connected components.
Connect the power cable of your other components to these
outlet(s). Power to these outlet(s) is supplied when this unit is
turned on. However, power to these outlet(s) is cut off when this
unit is turned off. For information on the maximum power or the
total power consumption of the components that can be connected
to these outlet(s), see “Specifications” on page 167.
Connecting the power cable
AC IN
To the AC wall outlet