Yamaha RX-Z11 - Manual (Page 26)

Connections
26
En
The use of subwoofers with built-in amplifiers, such as the Yamaha Active Servo Processing Subwoofer System, is effective not only for
reinforcing bass frequencies from any or all channels, but also for reproducing the high fidelity sound of the LFE (low-frequency effect)
channel included in digital audio signals. Turn it slightly toward the center of the room to reduce wall reflections.
You can use one or two subwoofers and select various positions of the subwoofers.
■ Configuration 1:
Front left and right
Set “Configuration” in “Subwoofer” to
“Stereo” (see page 100).
Speaker indications
FL/FR: Front left/right
C: Center
SL/SR: Surround left/right
SBL/SBR: Surround back left/right
LSW/RSW: Left/right subwoofer
■ Configuration 2:
Front and rear
Set “Configuration” in “Subwoofer” to
“Front & Rear” (see page 100).
Speaker indications
FL/FR: Front left/right
C: Center
SL/SR: Surround left/right
SBL/SBR: Surround back left/right
FSW/RSW: Front/rear subwoofer
■ Configuration 3:
A single subwoofer
Set “Configuration” in “Subwoofer” to
“Monaural” (see page 100).
Speaker indications
FL/FR: Front left/right
C: Center
SL/SR: Surround left/right
SBL/SBR: Surround back left/right
SW: Subwoofer
■ Connecting subwoofers
Using subwoofers
C
LSW RSW
SL SR
FL FR
SBR SBL
C
RSW
FSW
SL SR
FL FR
SBR SBL
C
SW
SL SR
FL FR
SBR SBL
PRE OUT
(FRONT)
(REAR) SUBWOOFER
R
L
Left (or front) subwoofer
Right (or rear) subwoofer
(U.S.A. model)
y
If you connect a single subwoofer, connect the subwoofer to the left
SUBWOOFER PRE OUT jacks.