Print sensor – Zebra Technologies ZEBRA RXI4TM User Manual
Page 100
Configuration
Standard Control Panel Parameters
100
P1009874-002
Xi4™/RXi4™ User Guide
1/7/10
Print Sensor Profile
A sensor profile shows sensor settings compared to actual sensor readings.
This label (which will extend across several actual labels or tags) can be
used to troubleshoot printing problems. To interpret the results of the
sensor profile, see
.
To print a sensor profile:
1.
Press
PLUS (+)
to start this standard calibration procedure and print a
media sensor profile.
2.
If the sensitivity of the sensors must be adjusted, perform
Media and Ribbon Sensor Sensitivity on page 101
Table 8 • Printer Parameters (Sheet 10 of 22)
Language/Parameter
Action/Explanation
This manual is related to the following products: