Zoom ADSL X6v 5697 - Manual (Page 28)

ADSL X6v User Guide 28
Checking Your Settings
If you ever need to check your wireless settings, you can do so
from the Wireless Setup page. This page is available in the Zoom
Configuration Manager by clicking the Wireless icon.
The following table explains the settings.
This setting… Lets you specify…
Wireless Status Enable shows that your wireless network is up.
Disable indicates that your wireless network is
down.
SSID The Service Set Identifier for your wireless
network. By default, the SSID for the X6v is
zoom. You can change the SSID to any name
that you want.
Hide SSID Lets you specify whether or not to broadcast
the SSID of your network. If you do not want
to broadcast the SSID, set this option to True.
Default
Channel The channel your wireless connection uses by
default for your wireless connection. The X6v is
set for channel 10.
Profile The standard used by your wireless adapters.
This drop-down list contains 802.11b Only,
802.11g Only, or Mixed Long.
The default is Mixed Long, (800.11b+g) which
allows you to mix both b and g wireless
adapters.
Encryption The type of encryption used for your wireless
Internet signal. This drop-down list contains
None, WEP-64 bit, WEP 128 bit, WPA and
WPA2.
The default is None, meaning that no security
is enabled.
Region If your country is not listed, select Other.