Xerox Phaser Printer EX7750 User Manual
Page 55
2
2-15
Calibrating the EX7750 with the DTP41
T
O
CALIBRATE
THE
EX7750
USING
THE
DTP41
1.
Start Calibrator.
For instructions on starting Calibrator, see
2.
Choose X-Rite DTP41 as the measurement method.
3.
In the Check Print Settings pane, choose the desired calibration set.
Choose the appropriate calibration set for the mode and type of media that you use
most often.
N
OTE
:
For this calibration to take effect, the calibration set must be associated with one
or more output profiles. You do not need to make any new associations for the default
calibration set, since it is already associated with the default output profile.
4.
In the Generate Measurement Page pane, click Print.
The Print Options dialog box appears.
5.
Choose the appropriate options, and click Print.
For Page Type, choose 21 or 34 Sorted Patches.
Paper Size is automatically set to LTR/A4 for 21 Sorted Patches, or 11
x
17/A3 for
34 Sorted Patches.
For Input Tray, choose the paper source for printing the measurement page.
6.
Retrieve the measurement page from the printer.