Winegard RD-9946 - Manual (Page 9)

9
6. Attach coax cable from antenna assy. to jack on mount, see Figure 10.
Make sure to feed coax cable under the shaft. Slide weather boot over boot
collar.
7. Attach antenna/feed assembly to mount with (2) 10-32 x 1-1/8" screws and
washers provided, see Figure 10. (Torque: 6 ft. lbs.)
Rev. 5/99
Antenna/Feed
Assembly
(2) 10-32 x 1/1/8"
Hex Head Screw
(2) 10-32 Washers
Mount Assembly
Figure 10 Feed coax under shaft.