Wayne-Dalton 9800 User Manual

Page 23

Tools Needed:

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at

www.wayne-dalton.com

none

Torsion Spring Assembly

NOTE: Right and left hand is always
determined from inside the building
looking out.

NOTE: Identify the springs provided as
either right hand wound (red winding
cone), which goes on the lEFT haND
sIDE or left hand wound (black winding
cone), which goes on the RIGhT haND
sIDE.

Facing the inside of the door, lay the
torsion tube on the floor. lay the spring
with the black color coded winding
cone and the black color coded cable
drum, at the right hand end of the tube.
lay the spring with the red color coded
winding cone and the red color coded
cable drum, at the left hand end of the
tube.

lEFT haND

CablE DRuM

RED

RIG

haND

uND

RED

WINDING

CONE

lEFT

haND

sIDE

RIGhT haND CablE

DRuM blaCk

TORsION

TubE

lEFT

uND

bla

WINDING

CONE

RIG

haND

sIDE

NylON CENTER

bRaCkET bushING

lEFT haND CablE

DRuM RED

RIGhT haND WOuND

RED WINDING CONE

lEFT haND sIDE

NylON CENTER

bRaCkET bushING

RIGhT

haND

CablE

DRuM

blaCk

TORsION

TubE

lEFT haND WOuND

blaCk WINDING CONE

RIGhT haND sIDE

NOTE: The set screws used on all
torsion counterbalance winding cones
and cable drums, are now colored red.
DO NOT identify right and left hand by
the set screw color.

slide the nylon center bushing onto the
torsion tube followed by the springs and
cable drums. The nylon center bushing,
springs and cable drums must be
positioned, as shown. With assistance,
pick up the torsion assembly and slide
one end of the tube through one end
bearing bracket. lay the torsion tube
into the center bearing bracket and
slide the other end of the tube into the
opposite end bearing bracket. Position
the torsion tube so that equal amounts
of the tube extend from each end
bearing bracket.

TORsION

assEMbly

CENTER

bRaCkET

Equal

sPaCING

END

bEaRING

bRaCkET

TORsION

assEMbly

INST

ALLA

TION