SUUNTO D9 - Manual (Page 96)

94
9.5.2. WIRELESS TRANSMITTER BATTERY REPLACEMENT
NOTE! It is advisable to contact an authorized Suunto dealer for transmitter battery
replacement. It is imperative that the change is made in a proper manner to avoid any
leakage of water into the transmitter.
CAUTION! Defects caused by improper battery installation are not covered by the
warranty.
BATTERY KIT
The transmitter battery kit includes a 3.0 V CR ½ AA lithium cell battery and a lubrica-
ted O-ring. When handling the battery do not make contact with both of the poles at
the same time. Do not touch the metal surfaces of the battery with your bare fi ngers.
TOOLS REQUIRED
•
A Phillips head screwdriver
•
Soft cloth for cleaning.
TRANSMITTER BATTERY REPLACEMENT
To change the transmitter battery, follow the procedure below:
1. Remove the transmitter from the regulator HP port
2. Unscrew and remove the four Phillips screws on the back of the transmitter
3. Pull off the transmitter cover
4. Carefully remove the o-ring. Be careful not to damage the sealing surfaces.