Dive numbering – SUUNTO D9 User Manual
Page 74
72
-
Er, if the decompression ceiling was violated (= Error Mode) (Table 6.1)
Or in the alternative displays:
-
maximum depth of last dive in meters [ft]
-
dive time of last dive in minutes, shown as DIVE TIME
-
the current time, shown as TIME
-
the current temperature with °C for Centigrade [or °F for Fahrenheit]
-
Cylinder pressure in bars [psi] (if enabled)
If set to Nitrox mode, the following information will also be shown:
-
the oxygen percentage labeled O
2
%
-
the oxygen partial pressure labeled PO2
-
the current oxygen toxicity exposure labeled OLF
6.5.2. DIVE NUMBERING
Several repetitive dives are considered to belong to the same repetitive dive series
when the dive computer has not counted the no-fl ying time to zero. Within each se-
ries, the dives are given individual numbers. The fi rst dive of the series will be numbe-
red as DIVE 1, the second as DIVE 2, the third as DIVE 3, etc.
If you start a new dive with less than 5 minutes of surface interval time, the dive com-
puter interprets this as a continuation of the previous dive and the dives are consi-
dered to be the same. The diving display will return, the dive number will remain un-