SUUNTO D9 - Manual (Page 37)

35
and personal settings are displayed (Fig. 5.3) A few seconds
later the battery power indicator is shown (Fig. 5.4.)
At this time, perform your prechecks making sure that:
•
the instrument operates in the correct mode and pro-
vides a complete display (Air/Nitrox/Gauge mode)
•
the battery level is ok
•
the altitude, personal adjustment, safety/deep stops
and RGBM settings are correct
•
the instrument displays correct units of measurement
(Metric/Imperial)
•
the instrument displays correct temperature and depth
(0.0 m [0 ft])
•
the buzzer beeps
If the optional wireless pressure transmitter is used (see chap-
ter 2.4. Wireless pressure transmission) ensure that:
•
the pressure transmitter has been properly attached
and that the cylinder valve is open
•
the transmitter and the wrist unit have been properly
paired on a suitable code
•
the pressure transmitter is working (lightning symbol
blinks, cylinder pressure is displayed), and that there
is no low battery warning displayed
Fig. 5.2. Startup. All seg-
ments shown.
Fig. 5.3. Altitude and
personal settings.
d) Off Mode, Diving Mode
disabled