Time mode settings, Daily alarm – SUUNTO D9 User Manual
Page 28
26
Fig. 3.2. The Stopwatch displays
hours, minutes, seconds and
tenths of seconds.
Fig. 3.3. Entering Time Settings
3.3. TIME MODE SETTINGS
To enter the time mode settings press the DOWN button for
>2s when in TIME mode. The display will briefl y display “Time
Settings” (Fig 3.3), and then display the fi rst available setting.
The settings available in TIME mode are:
1. Daily alarm (Fig 3.4, 3.5)
2. Time (Fig 3.6, 3.7)
3. Dual time (Fig 3.8, 3.9)
4. Date (Fig 3.10, 3.11)
5. Units (Fig 3.12, 3.13)
6. Backlight (Fig 3.14, 3.15)
7. Tones (Fig 3.16, 3.17)
To toggle between available settings use the UP/DOWN but-
tons. Press SELECT to enter/review selected settings. Press
SELECT to move between values, and UP/DOWN to change
the settings. Exit by pressing the MODE button.
3.3.1. DAILY ALARM
You can set one daily alarm in the dive computer. When the
daily alarm activates, the time display blinks and the alarm
sounds for 24 seconds. The alarm is given at the preset time
each day. Press any button to stop the audible alarm, after it
has activated.
Fig. 3.4 . Entering Daily Alarm
Settings