Safety stops/deepstops, Rgbm settings, Tank pressure – SUUNTO D9 User Manual

Page 49

5.2.6. SAFETY STOPS/DEEPSTOPS

The deepstop setting allows the user to choose between tra-
ditional safety stops or deep stops. If Deepstops are set to
OFF, traditional safety stop calculation is used. If set to ON,
iterative Deepstops will be prompted instead. The length of
the individual deepstops can be set to 1 or 2 minutes.

5.2.7. RGBM SETTINGS

For certain divers and diving conditions you may want to set
attenuated RGBM mode. The selection is displayed during the
dive mode startup. The options are full RGBM effects (100%),
and attenuated RGBM (50%).

5.2.8. TANK PRESSURE

The wireless transmission can be set “ON” or “OFF” depen-
ding on if the optional wireless pressure transmitter is used or
not. No cylinder pressure related data is shown or data recep-
tion made when this selection is “off”.

You can set the secondary cylinder pressure alarm point. The
50 bar alarm is fi xed and cannot be changed. The 35 bar se-
condary alarm pressure can be set in the range 10 –200bar.

Fig. 5.22 Setting RGBM ad-
justment. Press up/down to
change setting.

Fig. 5.23 Entering Tank
pressure settings