At the surface – SUUNTO D9 User Manual
Page 73

71
-
the current depth is displayed
-
all diving related alterative display data is available
-
the ascent rate bar-graph is displayed
-
the tank pressure bar-graph is displayed (if wireless
transmission enabled)
In order to save battery power the compass display will auto-
matically return to the DIVE mode after 60s has elapsed since
the last button press.
6.5. AT THE SURFACE
6.5.1. SURFACE INTERVAL
An ascent to any depth shallower than 1.2 m [4 ft] will cause
the DIVING display to be replaced by the SURFACE display,
giving the following information (Fig. 6.24.):
-
present depth in meters [ft]
-
no-fl ying warning indicated by an airplane icon (Table
6.1)
-
Diver attention symbol indicates surface interval time
should be prolonged (Table 6.1)
-
STOP label for 5 min, if the Mandatory Safety Stop
was violated
Fig. 6.25. Surface Mode af-
ter a violated decompressi-
on dive. Er symbol indicates
that you have violated the
ceiling for more than three
minutes. You must not dive
again for at least 48 hours.