SUUNTO D9 - Manual (Page 23)

21
Long continuous push (> 2 sec.):
•
To enable gas switching in Nitrox mode.
Down (DOWN) Button
Short push:
•
To toggle between date, second or dual time display in the Watch mode
•
To change submode
•
To decrease the value in the Setting Mode
•
To change dive in the Logbook Mode
•
To toggle between the Max depth, Watch time, Tank pressure, and O2% in
the Diving and Compass modes.
Long continuous push (> 2 sec.):
•
To enter Settings mode
•
To toggle between Ceiling and Remaining Air Time display
2.2. WATER CONTACTS
The water contacts control the automatic activation of the Dive Mode.
The water and data transfer contact is located on the right side of the case (Fig 2.2).
When submerged the water contact is connected to casing (which is the other pole
of the water contact) by the conductivity of the water. The “AC” symbol (Active Con-
tacts, Fig. 2.3.) will appear on display. The AC text will be shown until the water con-
tact deactivates.