Windsor Chariot iGloss Burnisher CB20 - Manual (Page 19)

MACHINE OPERATION
86306300 CHARIOT BURNISHER 11/09/07 3-12
TO BEGIN BURNISHING
When operating the machine around people, pay
close attention for unexpected movement. Use
extra caution around children.
1. Place left foot on operator presence pedal.
Throttle pedal must be in neutral position.
2. Turn machine power on.
3. Check position of Directional Control Switch to
ensure that machine is set to travel in direction
intended.
4. Press the Drive Reset Switch.
NORMAL BURNISHING
Plan the burnishing patern in advance. The longest
track is around the perimeter of the area to be
burnished. For efficient operation, the runs should
be the longest possible without turning, stopping, or
raising or lowering the burnisher head.
In order to achieve the best possible results, the
area which is to burnished should be swept before
burnishing.
RECOMMENDED BURNISHING PATH
INEFFICIENT BURNISHING PATH