VXI 3002 - Manual (Page 31)

3-1
Chapter 3
PROGRAMMING
Introduction
An IEEE 488.2 program interface is provided. Ease of use is ensured by careful selection of
mnemonics. For example, if carrier frequency and RF level are to be set to 2.54 MHz and
-27.3 dBm respectively, the VXI instruction message is:
CFRQ:VALUE 2.54 MHZ
RFLV:VALUE -27.3 DBM
For full information on the IEEE protocols and syntax the IEEE 488.2 standard should be
consulted.
Device listening elements
The following is a list of the device listening elements (as defined in the IEEE 488.2 standard)
which are used in the instrument:
Device talking elements
The following is a list of the device talking elements (as defined in the IEEE 488.2 standard) which
are used in the instrument: