Vista Imaging Vista Routing - Manual (Page 68)

Using VistARad in a Routing System Routing User Guide
To display a routed exam
1 Log into the site or division that the routed exam was sent from.
2 Use an exam list to locate the routed exam you want to open. By default, exam lists
are filtered to show only exams that have been routed from the site or division you are
performing remote reading for.
 You can view all exams (routed and non-routed) by clearing the checkbox in the
Remote Read Filter area near the top of the Manager window.
3 Double-click the exam, or select the exam and click Open.
 If a non-routed exam (an exam without a value in the RC column) is selected for
display, there will be a delay while the images are retrieved.
 A routed exam can be locked and marked as interpreted in the same manner as any
other exam. For more information, refer to VistARad User Guide.
 You can use ReadList to successively display all routed exams in an exam list. For
more information, refer to VistARad User Guide.
 Local copies of routed exams are stored for a certain period of time (typically
several days) and then deleted automatically by a process initiated from the
sending site. The “original” exam remains available at the sending site after routed
copies are deleted.
VistA Imaging V. 3.0, Patch 18 April 2006 60