Vista Imaging Vista Routing - Manual (Page 63)

Routing User Guide Using the Routing Gateway
Routing Gateway Menu Options
This section describes the menu options associated with the Routing Gateway. Routing
Gateway menu options are accessed by entering 3: Routing Gateway from the DICOM
Gateway main menu.
1 Start the Transmission Processor
2 Stop the Transmission Processor
3 Start the Evaluation Processor
4 Stop the Evaluation Processor
5 Import Routing Rules
6 Purge all completed entries in the Transmission Queue
7 Purge completed and expired entries in Transmission Queue
8 Re-Queue all Failed Entries in the Transmission Queue
9 Remove Obsolete Entries from Transmission Queue
10 Display Routing Rules
1 Start the Transmission Processor
Use this option to start the transmission processor. Once started, the transmission
processor will begin processing entries in the transmission queue.
 As the transmission processor sends exams to Imaging destinations, it will map
and un-map certain drives. For more information, see page 66 .
If a single transmission processor cannot manage a site’s routing workload, additional
transmission processors, each sending images to a subset of destinations, can be started
using this option. For detailed steps, see page
51 .
2 Stop the Transmission Processor
Use this option to stop all running instances of the transmission processor. When this
option is executed, a flag is set that the transmission processor will recognize as “stop
processing.” The transmission processor checks this flag after transmitting each image
file.
 Stopping the transmission processor can result in an incomplete exam being sent to
a destination. If this occurs, the remainder of the exam will be transmitted when
the transmission processor is re-started, provided that the applicable entries in the
transmission queue are still present.
April 2006 VistA Imaging V. 3.0, Patch 18 55