Vista Imaging Vista Routing - Manual (Page 62)

Using the Routing Gateway Routing User Guide
Disabling Routing
Short-Term Routing Shutdown
If routing needs to be disabled for a short period of time, the easiest thing to do is to stop
the transmission processor(s). When this is done, images will still be evaluated and
queued, but they will not be transmitted until the transmission processor is restarted.
Before restarting the transmission processor, use option 9: Remove Obsolete Entries from
Transmission Queue to remove any entries that may have been created while the routing
system was disabled. For more information, see page
57 .
Long-Term Routing Shutdown
If routing needs to be disabled for an extended period of time, perform the following:
ƒ Stop the evaluation processor
ƒ Stop all transmission processors
ƒ Alter the configuration files for all Image Gateways to indicate that they are NOT part
of a routing system (see page 37 for more information).
All images processed when routing is disabled as described above cannot be
autorouted, even after routing has been restarted. Such images will need to be
routed on-demand using VistARad.
VistA Imaging V. 3.0, Patch 18 April 2006 54