Uniden UBCD996T - Manual (Page 73)

73
Off Off
Only
Program System
Edit Sys Option
Emergency Alert
Off
Alert 1 9
Off
Set Level
Auto
Level 1 15
Program System
Edit Sys Option
EDCS ID Format
AFS Format
Decimal Format
— the scanner ignores I-calls. The default setting is .
— the scanner only tracks I-calls and ignores other radio traffic on the system.
Press to select.
To set the I-Call to a wildcard receive condition, press + .
Select a Motorola Type I, II or EDACS Wide/Narrow system
— the scanner does not alert you to emergency transmissions.
- — the scanner sounds an alert beep to notify you of the emergency
transmission. The default alert is . You can choose any of 9 different beep types.
Once you choose an alert tone, next:
— the scanner automatically sets the emergency alert beep to the master
volume level.
- — the scanner adjusts the volume you hear to the level you select.
Select an EDACS Wide/Narrow system
EDACS Talk Group ID’s are commonly provided in one of two formats: and
. This setting determines how you enter EDACS ID’s and how the scanner
displays them.
— the scanner uses AFS format for Talk Group ID’s
— the scanner uses decimal format for Talk Group ID’s
The scanner defaults to AFS (agency, fleet, subfleet) format - the format used
in most EDACS systems.
Note: [.No] [0]
MENU]
[MENU]
AFS
Decimal
Note:
Setting the Emergency Alert Option ME
Setting the EDACS ID Format E