Uniden UBCD996T - Manual (Page 57)

57
Digital On Off
On
Off
Settings
Set Upside-down
On
Settings
Adjust Contrast
Level 1 Level 15
Settings
Set GPS Format
Settings
Set GPS Format
Set Pos Format
to select either or specifically for receiving digital channels.
— Press to select.
— Press to select.
This setting controls the orientation of the display. If you set Upside-down to , the
scanner inverts the display text and graphics.
There are 15 contrast levels. As you scroll from level 1 to 15 you see the contrast
change. Press the to lock the desired level until the time you desire
to change it.
Select a level to
These settings control how the scanner handles GPS input when you are using the
location-based functions.
This setting controls the format used for entering GPS coordinates into the scanner.
DMS: DDD MM'SS.ss — Enter the location in Degree, Minute, Second format.
DEG: DDD.dddddd — Enter the location in Degree and fraction format.
Setting the Display Orientation
Adjusting the Display Contrast
Setting the GPS Format
[MENU]
Scroll Control
[MENU]
[MENU]
[MENU]
Setting the Position Format
°