Uniden UBCD996T - Manual (Page 17)

Search Lockout Limits
About This Manual
The screen displays used in this manual are representations of what might appear
when you use your scanner. Since what you see depends on the frequencies and
user IDs for your area and the settings you select, you might notice some
differences between what is in this manual and what appears on your scanner.
To get the most from this manual, review the contents to become familiar with the
basic functions available.
The Scroll Control, a dual purpose control, also lets you switch to secondary function
operations. When used in this manner, you see in this manual. Located
prominently on the right of the UBCD996T’s front panel, the knob/switch lets you
easily control channel selection, plus Normal and Function Modes, as well as how
most of the information appears on the display.
Simply turn the .
To use tap the . This action is written in shorthand as
which is fully explained in the next section. When you tap the control appears
and remains in the upper left corner of the display for 3 seconds. During this time,
press any button to access the button’s second function. Or, press and hold the
Scroll Control for 2 seconds. The scanner beeps, and the function is “latched”
so that is does not return to normal mode until you tap the Scroll Control again.
flashes at approximately 1 second intervals.
If you select while scanning, the UBCD996T continues to scan, but holds on
the current system until the function operation is cancelled.
Using the Scroll Control
To adjust menu settings, change channels in Hold mode, and resume
scanning: Scroll Control
Scroll Control
17