Uniden UBCD996T - Manual (Page 68)

68
Throughout the balance of this manual you will see a designation such as
on the same line as a heading. This means that the section, in this example, applies
otorola, DACS, TR, onventional and EDACS CAT systems.
In order for trunk tracking to work properly, you have to specify the correct system
type when you create the system. Here are some tips for selecting the correct type:
Use online resources, such as the www.radioreference.com database, to identify the
system type.
Even though a system has digital channels, it is not necessarily a P25 system. To be
P25, the system type must be described as Project 25 (there are many Motorola 800
Standard systems that have some digital channels.
These should be entered as Motorola 800 Standard and not P25).
EDACS Wide is the same as EDAC Standard.
EDACS Networked sites are EDACS Narrow
Following these steps to change the system name.
Select the system
To enter a letter, turn the until the character you want appears. To
enter a decimal point, press . To move the cursor to the left, press . To move
the cursor to the right, press .
To clear a character, press twice. To clear all characters, press 3 times.
To accept an entry, press or .
Select a conventional system
MELCS
M E L C S
[MENU]
Scroll Control
[.No] [4]
[6]
[.No] [.No]
[E ]
[MENU]
Specifying the Correct System Type
Program System
Edit Name
Program System
Edit Sys Option
Set Quick Key
YES
Programming System Options MELCS
Editing the System Quick Key C