Uniden UBCD996T - Manual (Page 49)

49
! ID Search — the scanner stops on any unlocked talk group that becomes active.
To toggle between ID Scan and ID Search, press then press
while the scanner is scanning the system.
If the scanner does not scan the system long enough for you to easily do this, press
and rotate the Scroll Control to select the changed system. Then, press
within 2 seconds.
To temporarily hold on a system, tap the . To hold on a different
system, tap the then rotate the control to select the system.
Normal scanning resumes 2 seconds after your last selection.
To permanently hold on a site or system, press and hold the for 2
seconds. flashes in the display’s upper left corner. The scanner continues to scan
only the current system. To hold on a different site or system, rotate the
to select the new site or system then press .
To hold on a channel, press while the channel is active. To select
a different channel, turn the . If you scroll past the beginning or end of
the current system, the scanner selects channels in the previous or next system. To
resume scanning, press .
To quickly store an active talk group ID during ID search, press . You see:
. Otherwise, press . If
you press , the scanner stores the ID into a channel group called
in the current system.
1. Hold on an existing channel in any system.
2. Enter the frequency or talk group ID you want to store (press twice to enter
hyphens in talk group ID’s).
3. To quick-store the channel or talk group ID, press .
Otherwise, press .
[SCAN/SEARCH]
[SCAN/SEARCH]
Scroll Control
Scroll Control
Scroll Control
Scroll
Control [E ]
[HOLD/RESUME]
Scroll Control
[SCAN/SEARCH]
[E ]
[.No]
[E ]
[E ]
[.No]
Holding On a System
Holding On a Channel
Quickly Storing an ID During ID Search
Quick-Storing Channels or Talk Group ID’s (TGID)
YES
YES
YES
YES
Quick TGID Save?
To save the ID into a channel, press [E ]
Qck Save
Grp
YES