Setting the serial port speed – Uniden UBCD996T User Manual

Page 58

Setting the Time Format

Setting the Time Zone

Setting the Distance Units

[MENU]

This setting controls the format used for displaying the time on the GPS data

screens.

— the scanner displays time in 12-hour format using am for mornings and pm

for evening times.

— the scanner displays time in 24-hour format using 0 for midnight and 23 for

11 pm.

This setting controls the format used for adjusting Universal time to local time. Set

your local time’s

from UTC (formally known as GMT).

This setting controls the distance units shown in the GPS data screens and used for

entering distance for POI’s

— The scanner uses miles.

— The scanner uses kilometers.

Use this setting to control the data rate used for the front and back panel serial ports.

You typically set the front port to match the speed used to communicate with

Settings

Set GPS Format
Set Time Format

12H

24H

Settings

Set GPS Format
Set Time Zone

Settings

Set GPS Format
Set Unit

mile

Settings

Set Serial Port
Set Baud Rate
Set Front Port

Set Rear Port

offset

Setting the Serial Port Speed