Unitech PA950 - Manual (Page 66)

6-66
Copy a contact
1. In the contact list, select the contact. To select multiple contacts, tap
and drag.
2. Tap Tools, and then Copy Contacts.
See Also: Create or change a contact
Send a message to a contact
1. In the contact list, tap and hold the contact. To select multiple contacts,
tap and drag. Then, tap and hold the selected contacts.
2. On the pop-up menu, tap Send E-mail or Send SMS, depending upon
the type of message to send.
To send an e-mail message, you must have an e-mail address
configured for the contact. To send an SMS message, you must have
an SMS number for the contact, which is usually the mobile phone
number.
See Also: Find a contact
Beam a contact
Beam a contact
To beam a contact, in the contact list, tap and hold the contact. On the
pop-up menu, tap Beam Contact.
To beam multiple contacts, tap and drag to select the contacts. Then,
tap Tools > Beam Contacts.
When using infrared (IR), align the IR ports according to the
instructions in your owner's manual so that they are unobstructed and
within a close range.