Unitech PA950 - Manual (Page 36)

3-36
Beam
Tap > Settings > Connections tab > Beam.
By default your device detects incoming infrared (IR) and Bluetooth
beams and prompts you to accept them. If you do not want your device to
detect or receive beams, clear the Receive all incoming beams check
box.
If someone attempts to send you an IR beam from an older device,
you may not be prompted to accept it. In this case, before the beam is
sent from the other device, tap Receive an infrared beam at the
bottom of the Beam screen.
See Also: Beaming Information
Receiving a Bluetooth Beam
Clock
Tap > Settings > System tab > Clock.
If you visit a particular time zone often, select it as your Visiting time
zone on the Time tab so that you can quickly see the correct date and
time.
You can use your device as a travel alarm clock by setting a wake-up
alarm on the Alarms tab. Tap the alarm icon to select the type of alarm
you want.
To change the way the date or time is displayed on your device, go to
Regional Settings.
The clock is displayed on the navigation bar. Tap the clock to see
today's date.