Toshiba B-SA4TP SERIES - Manual (Page 63)

2. PRINTER SETUP ENGLISH VERSION EO1-33048
2.10 Position and Print Tone Fine Adjustment
E2-50
2.10 Position and Print
Tone Fine
Adjustment
This section describes how to fine adjust a print start position, cut/strip
position, reverse feed amount, print tone, and ribbon motor torque.
When a fine adjustment is required, such as print start position, print tone,
etc, follow the procedure below.
1. Turn on the printer and confirm that “ONLINE” appears on the LCD
Message Display.
2. Press the [PAUSE] key to pause the printer.
3. Hold down the [RESTART] key for three seconds until “<1>RESET”
is displayed.
4. Press the [FEED] or [RESTART] key until “<3>ADJUST SET”
appears on the LCD Message Display.
5. When “<3>ADJUST SET.” appears, press the [PAUSE] key to enter
the Parameter Fine Adjustment Mode.
ONLINE
B-SA4T V1.0
P
R
PAUSE
B-SA4T V1.0
R
<1>RESET
F
<3>ADJUST SET
P