Toshiba B-SA4TP SERIES - Manual (Page 21)

2. PRINTER SETUP ENGLISH VERSION EO1-33048
2.3 Loading the Media
E2- 8
2.3 Loading the Media
(Cont.)
12. There are three issue modes available on this printer. How to set the
media for each mode is provided below.
In the batch mode, the media is continuously printed and fed until the
number of labels/tags specified in the issue command have been printed.
(1) Pull the top edge of the media past the Platen.
(2) Close the Top Cover until it clicks.
When the optional Strip Module is fitted, a label is automatically
removed from the backing paper at the Strip Plate as each label is printed.
(1) Open the Front Cover holding its right side.
Strip mode (Option)
Batch mode
Front Cover
Be careful that your fingers,
jewellery, clothing, etc., are not
draw into the rollers of the Strip
Unit.
WARNING!
Strip Unit