3 loading the media (cont.) – Toshiba B-SA4TP SERIES User Manual

Page 22

2. PRINTER SETUP

ENGLISH VERSION EO1-33048

2.3 Loading the Media

E2- 9

2.3 Loading the Media

(Cont.)

(2) Press down the Release Bar to open the Strip Unit.

(3) Remove enough labels from the leading edge of the media to leave

300mm of backing paper free.

(4) Pass the backing paper through the opening under the Backing Paper

Feed Roller. Then, close the Strip Unit until it clicks.

(5) Insert the leading edge of the backing paper into the slot of the Front

Cover.

(6) Close the Front Cover and the Top Cover.

NOTE:

Be sure to close the Strip Unit
completely. Failure to do this may
cause a paper jam.

Backing Paper

Backing Paper Feed Roller

Click

Top Cover

Front Cover

Slot

Release Bar

Strip Unit