Toshiba B-SA4TP SERIES User Manual

Page 41

2. PRINTER SETUP

ENGLISH VERSION EO1-33048

2.7 Setting an Operating Environment

E2-28

2.7.3 IP Address Setting

(TCP/IP) (Cont.)

(4) Socket Port
This parameter is to enable a socket port and set a socket number.

(5) DHCP
This parameter is to enable DHCP.

PORT ON 08000

<7>IP ADDRESS
DHCP

PORT ON 08000

PORT OFF -----

PORT ON 08000

SOCKET PORT

[RESTART] or [FEED]

[PAUSE]

Enter a number for each digit of the
port number with the [RESTART] or
[FEED] key.

[PAUSE]

NOTES:

1. Pressing the [PAUSE] key

while “PORT ON 08000” is
displayed allows you to set the
port number.

2. Set a number for each digit by

using the [RESTART] or
[FEED] key.

[RESTART] key: Increment

[FEED] key: Decrement

Range: 00000 to 65535

A number exceeding 65535 will
be automatically corrected to
65535.

3. Be careful not to set the same

port number that other
applications are using.

4. Press the [PAUSE] key to move

the cursor to the next digit.

5. After the last digit is set, press

the [PAUSE] key to go to
DHCP Setting.

NOTE:

Pressing the [PAUSE] key while
“DHCP ON” is displayed allows
you to set a DHCP client ID.

<7>IP ADDRESS
DHCP ON

<7>IP ADDRESS
DHCP CLIENT ID

<7>IP ADDRESS
DHCP

<7>IP ADDRESS
DHCP OFF

[PAUSE]

[RESTART] or [FEED]