Turning on the power, Starting up for the first time – Toshiba M300 User Manual
Page 63
User’s Manual
3-7
Getting Started
Turning on the power
This section describes how to turn on the power.
The Power button LED indicates the status. Refer to the
section in Chapter 6, Power and Power-Up Modes .
1. Open the computer’s LCD display panel.
2. Press and hold the computer’s power button for two or three seconds.
Turning on the power
Starting up for the first time
When you first turn on the power, the computer’s initial screen is the
Microsoft Windows XP Startup Screen Logo. Follow the on-screen
directions for each screen. During setup, you can click the Back button to
return to the previous screen.
Be sure to read the
Windows End User License Agreement
display
carefully.
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section
■
If the USB floppy disk drive is connected, make sure it is empty. If a
floppy disk is in the drive, press the eject button and remove the floppy
disk.
Power button
Be sure to read the License Agreement carefully.