Power-up modes, Windows utilities, Hot keys – Toshiba M300 User Manual
Page 125: Panel power on/off, System auto off, Power-up modes -17, Windows utilities -17 hot keys -17, Panel power on/off -17 system auto off -17
User’s Manual
6-17
Power and Power-Up Modes
Power-up modes
The computer has the following power-up modes:
■
Boot: Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
■
Hibernation: Data in memory is saved to the hard disk.
■
Standby: Data is maintained in the computer’s memory.
Windows utilities
You can specify the setting in TOSHIBA Power Saver.
Hot keys
You can use hot keys Fn + F3 to enter Standby mode and Fn + F4 to enter
Hibernation. Refer to Chapter 5,
Panel power on/off
You can set up your computer so that power turns off automatically when
you close the computer’s LCD display panel. When you open the
computer’s LCD display panel, power turns on in Standby or Hibernation
mode but not in boot mode.
System Auto Off
This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in Standby mode or Hibernation mode in
Windows.
Refer also to the sections
and
in Chapter 3, Getting Started.
If the panel power off function is enabled and you use Shut down
Windows, do not close the computer’s LCD display panel until the shut
down function is completed.