Toshiba M300 - Manual (Page 133)

User’s Manual 7-7
HW Setup
Parallel Port Mode
The options in this tab are
ECP
and
Standard Bi-directional
.
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the
USB KB/Mouse Legacy Emulation
item to
Enabled
.
USB-FDD Legacy Emulation
Use this option to enable or disable USB-FDD Legacy Emulation.
ECP
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to
ECP
(Default).
Standard
Bi-directional
This setting should be used with some other
parallel devices.
Enabled
Enables the USB KB/Mouse Legacy Emulation
(Default).
Disabled
Disables the USB KB/Mouse Legacy Emulation.
Enabled
Enables the USB-FDD Legacy Emulation
(Default).
Disabled
Disables the USB-FDD Legacy Emulation.