Toshiba G7 - Manual (Page 79)

G7 ASD Multi-Protocol Communication Option and PG Feedback Option Manual 72
11.5.9 Parameter Class
Class code 0x0F. The parameter class provides convenient access to various configuration parameters
implemented as attributes of other objects. Table 28 lists the supported parameters and their referenced
originating objects. For further information on a specific parameter (such as adjustment range, etc.)
refer to the referenced originating object. Further information can also be found in the Electronic Data
Sheet (EDS).
Table 28: DeviceNet Interface Configuration Group Parameters
Parameter # Originating Object Originating Attribute Page
1 Motor Data MotorType 65
2 Motor Data RateeCurrent 65
3 Motor Data RatedVoltage 65
4 Motor Data PoleCount 65
5 Control Supervisor NetCtrl 62
6 Control Supervisor State 62
7 Control Supervisor Running1 62
8 Control Supervisor Running2 62
9 Control Supervisor Ready 62
10 Control Supervisor Faulted 62
11 Control Supervisor FaultRst 62
12 Control Supervisor CtrlFromNet 62
13 AC/DC Drive AtReference 67
14 AC/DC Drive NetRef 67
15 AC/DC Drive SpeedActual 67
16 AC/DC Drive SpeedRef 67
17 AC/DC Drive RefFromNet 67
18 AC/DC Drive Frequency Command 67
19 AC/DC Drive Command Word 67
20 AC/DC Drive F831 Command Data 67
21 AC/DC Drive F832 Command Data 67
22 AC/DC Drive Output Frequency 67
23 AC/DC Drive Status Word 67
24 AC/DC Drive F841 Status Data 67
25 AC/DC Drive F842 Status Data 67
26 AC/DC Drive Universal Access Register 67
27 AC/DC Drive Universal Access Data 67
28 DeviceNet BOI 52
29 DeviceNet Bus-Off Counter 52