Thermador CIS365GB - Manual (Page 23)

24
Follow the steps below:
1. Select the required element
2. Press the 0 symbol. The u indicator goes out. The function will be deactivated.
The Powerboost Function
Use this function to heat up the contents of the pan faster than by using the heat
setting j. This function allows you to increase the maximum power level of the
element in use.
Restrictions when using
the Powerboost function
The Powerboost function may be used providing that the other element in the same
group is not switched on. (See picture) For example, if you want to activate this
function on element 5, number 4 (located behind it) must be switched off, and vice
versa. If this element is not off,
the letter x and heat setting j will flash on the
element indicator; then it will return to heat setting j without activating the
function.The same applies to elements 1 and 2.
In group 2, the powerboost function can be activated at the same time on all the
elements. (see figure).
Group 1 Group 2 Group 3
How to activate it
Follow the steps below:
1. Select an element.
2. Press the POWER BOOST symbol. The letter n will appear in the indicator. You
have now activated the function
Switching off
this function
Follow the steps below:
1. Select an element.
2. Press the POWER BOOST symbol. The letter n will no longer be displayed and
the element will return to heat setting j. The Powerboost function has been
deactivated.
NOTICE: In certain circumstances, the Powerboost function may be
deactivated automatically to protect the internal electronic components of
the cooktop.
Switching off this function