Thermador CIS365GB - Manual (Page 16)

17
Cooking sensor
This function allows you to cook on the rear elements. It is suitable for cooking foods
that are being heated; are in water, with a lot of oil or butter.
The cooking sensor function should not be used to roast.
Pans that contain hot food produce heat. The cooking sensor detects this heat and
the cooktop automatically regulates the temperature.
The element only heats up when necessary. This saves energy.
The oil and fat do not overheat.
It prevents food from overflowing in the pan when they boil, and help you avoid from
having to regulate the temperature.
Proper cookware
The proper cookware for this function should have a surface that properly gives off
the sensor heat. If the cookware is inappropriate, automatic temperature regulation
will not work. Food may boil over or burn.
The proper size of enameled cookware may be used. The pan base should be of
sufficient diameter to cover the element completely. If using stainless steel
cookware, use the sensor bands included with the appliance.
To use them, attach the sensor band to the pot by means of the adhesive backing.
Make certain that the sensor band is always facing the sensor. If the band is not
facing the sensor, the controller will not work properly and foods can boil over.You
can also purchase the sensor band from your electrical appliance dealer:
S SENSORSTRP
This cookware can be purchased in specialty stores or via our technical assistance
service. Always quote the reference number:
S SENSORPOT6 (optimized for working with the cooking sensor).
S SENSORPOT7 (optimized for working with the cooking sensor).
S SENSORPOTH (optimized for working with the cooking sensor).
S CHEFSPAN13 (16" pan oprimized for 13" zone).
Note
How it works
Advantages when cooking
Specialized cookware