TOA Electronics A-9120DH - Manual (Page 84)

84
14.1.1. Input settings
14.1. Default Setting Table
8 (7 only when ZP-001T is used)
OFF
[Settings when the ZP-001T is used]
Priority
Ducker
OFF
PAGING PORT Pre-paging Tone
Operation Mode
[Settings when the D-001T is used]
–10 dB
OFF
OFF
NONE
OFF Input Sensitivity
Phantom Power
VOX Function*
2
Trigger* 1
Zone 1 – 4* 1
Default
(IN1 – 8)
Setting Item
Input Channel Name
* 1 Only in the 1-channel or 2-channel output operation
* 2 Only in the normal matrix operation
[Settings when the AN-001T is not used]
BYPASS
–10 dB
OFF
OUT1
OFF
OUT1 (When the monitor ON/OFF setting is ON) ANC Operation ON/OFF
Input Sensitivity
Phantom Power
ANC-Activated Output
Monitor ON/OFF
Monitor Output Channel
[Settings when the AN-001T is used]
14.1.2. Audio output settings
Default
(OUT1 – 8)
Setting Item
Output Channel Name
14.1.3. Event settings
Default
01
NONE
Setting Item
Event Number
Event Classification
[Settings when the 900 series module is used]
NONE
OFF Trigger* 1
Zone 1 – 4* 1