Event setting items, Event number selection, P. 47-b1) – TOA Electronics A-9120DH User Manual
Page 47: P. 47-b2), Set to route), Input channel setting, P. 47-b3), Set to bgm end), Set to base)
47
E V E N T 0 1
I N 1
Input channel name
(B3) Input channel setting (when Event classification is set to ROUTE)
Set the input channel using the Input channel selection key.
The name of the set input channel is displayed on the screen.
One input channel can be set per Event.
E V E N T
0 1
N O N E
(B1) Event number selection
Event number
E V E N T 0 1
N O N E
(B2) Event classification setting
Event classification
• NONE:
Invalidates the selected Event.
• ROUTE:
Sets broadcast patterns consisting of input/output, trigger, and other settings.
• BGM END: Used to perform settings for terminating all Events to which inputs with priority 8 are assigned.
• BASE:
Groups broadcast patters which have been set to "Priority 8 Input with Trigger set to NONE " in
Classification ROUTE, so that they may be activated with a single trigger. This classification is
normally used to set the Event of BGM broadcasts.
Note: Screens that appear when the Up or Down shift key is pressed differ depending on the Event
classification settings.
13.6.2. Event setting items
Unless otherwise specified, use the Parameter setting knob for each parameter selection.
01 – 32 (default: 01)
Setting Range
NONE (default), ROUTE, BGM END, BASE
Setting Range
IN1 – 8 (default: IN1)
Setting Range