TurboChef Technologies High h Batch - Manual (Page 29)

9. To test settings before saving, press the bottom-
left soft key. The oven will initiate a cook cycle
to the specifications of new settings.
10. To save settings, keep pressing
ENTER
until
“Settings Saved” is displayed.
11. Press the
BACK
/
STOP
key three times to exit the
menu (doing so before saving settings will
erase changes).
Ordering a Smart Card
To order a Smart Card, call 800.90TURBO,
+1 214-379-6000, or your Authorized Distributor.
Loading Menu from Smart Card (Figures 26 and 27)
CAUTION: Loading a menu from a smart
card will overwrite all existing recipes
programmed into the oven.
To load a menu from a smart card:
1. Ensure oven is in either the
COOL
-
DOWN
or
OFF
state.
2. Insert the smart card into the smart card reader.
Orient card as shown in Figure 26.
3. Press bottom-left soft key.
4. Press the middle-left soft key to “Load Menu
from Card” (Figure 27).
5. Press
ENTER
to confirm or
BACK
/
STOP
to cancel.
After approximately 5 seconds, screen will display
that menu has loaded from card.
LEFT
RIGHT
< 1ST GROUP> FIRST ITEM
COOK TIME 00:00
RACK ON
EVENT
% TIME
% AIR
TEST 1
100
100 2
0
100 3
0
100 4
0
100
WARMING UP
F I G U R E 25: Modifying Recipes – Steps 8-11
Step: 9 Step: 11 Step: 8a Step: 8b Step: 8d
Step: 8c
Step: 10
Step: 8e
LEFT
RIGHT
< 1ST GROUP> FIRST ITEM
COOK TIME 00:00
RACK ON
EVENT
% TIME
% AIR
TEST 1
100
100 2
0
100 3
0
100 4
0
100
WARMING UP
F I G U R E
24: Navigating the Food Item Menu
Step: 7a The field selected
to be modified will
be bracketed.
Step: 7b Step: 7c Throughout this process, the oven
warms up in case the operator wishes
to test a new/modified recipe.
21 OPERATING THE OVEN