TurboChef Technologies High h Batch - Manual (Page 26)

Enabling/Disabling Done Screen (Figure 19)
Enabling the
DONE
screen allows the operator to
†
Save an adjusted cook time
†
Cook an item longer after it reaches the end
of its cook cycle
Disabling it prevents the operator from doing the
above and helps ensure all originally-programmed
cook times remain unaltered. By default, the
DONE
screen is enabled unless otherwise requested by the
customer.
To enable/disable the
DONE
screen:
1. From the
OPTIONS
menu, press the “Done
Screen” soft key (middle right) to turn the
DONE
screen on or off.
2. Press the
BACK
/
STOP
key to exit the
OPTIONS
menu.
Enabling/Disabling Demonstration Mode (Figure 20)
Enabling
DEMONSTRATION
mode allows the opera-
tor to view/show every operational aspect of the
oven without the oven actually heating up.
By default, the DEMONSTRATION mode is disabled
unless otherwise requested by the customer.
To enable/disable
DEMONSTRATION
mode:
1. From the
OPTIONS
menu, press the
“Demonstrate” soft key (bottom right) to turn
the
DEMONSTRATION
mode on or off.
2. Press the
BACK
/
STOP
key to exit the
OPTIONS
menu.
LEFT
RIGHT
F I G U R E 19: Enabling/Disabling the Done Screen
Step: 2
To access the OPTIONS menu,
simultaneously press and hold for 5 seconds.
Here the DONE screen is turned on. Step: 1
LEFT
RIGHT
F I G U R E 20: Enabling/Disabling the Demonstration Mode
Step: 2
To access the
OPTIONS
menu,
simultaneously press and hold for 5 seconds.
DEMONSTRATION
mode is turned off. Step: 1
18 OPERATING THE OVEN