Oki PRINTING SOLUTIONS MULTIFUNCTION PRINTER CX2633 - Manual (Page 51)

Configuring Your Machine > 51
Print Setup
(cont.) IBM PPR
Setup
(cont.) CR Function CR, CR+LF Selects whether a received
carriage return character (0Dh)
also causes a line feed.
LF Function LF, LF+CR Selects whether a received line
feed character (0Ah) also causes a
carriage return.
Line Length 80 COLUMN, 136
COLUMN Specifies the number of characters
per line.
Form Length 11 Inch, 11.7 Inch,
12 Inch Specifies the length of paper.
TOF Position 0.0 Inch - 1.0 Inch Specifies the distance of print from
the top edge of the paper.
Left Margin 0.0 Inch - 1.0 Inch Specifies the distance of print from
the left hand edge of the paper.
Fit to Letter Disable, Enable Sets the printing mode that can fit
print data, equivalent to 11 inches
(66 lines), in the LETTER-size
printable area.
Text Height Same, Diff Sets the height of a character.
SAME: Regardless of CPI, same
height
DIFF: As CPI, character heights
vary.
Cont Paper
Mode OFF, ON If you have multiple feed trays
installed in which the media is the
same size and type you can enable
continuous paper mode. When one
tray runs out of paper, the unit will
switch to another tray.
EPSON FX
Setup Character Pitch 10 CPI, 12 CPI, 17
CPI, 20 CPI,
PROPORTIONAL Specifies character pitch in this
emulation.
Font Condense 12CPI - 20CPI,
12CPI - 12CPI Specifies 12CPI pitch for Condense
Mode.
Character Set SET-1, SET-2 Specifies a character set.
Symbol Set IBM 437 Specifies a symbol set.
Letter 0 Style Disable, Enable Specifies the style that replaces
9BH with letter o and 9DH with a
zero
Zero Character Normal, Slashed Sets the zero to be slashed or
unslashed.
Line Pitch 6 LPI, 8 LPI Specifies the line spacing.
White Page Skip OFF, ON Selects whether blank pages are
printed or not.
CR Function CR, CR+LF Selects whether a received
carriage return character (0Dh)
also causes a line feed.
Line Length 80 COLUMN, 136
COLUMN Specifies the number of characters
per line.
FEATURE OPTION DESCRIPTION